Question 1

How often do I need to shake the ink supply units for Epson G6070

Accepted Answer

To prevent sedimentation and maintain print quality, you must shake the White ink supply units every 24 hours, typically at the start of the workday,. A message on the control panel will prompt you when this is necessary. All other ink colors (Black, Yellow, Magenta, Cyan) must be removed and thoroughly shaken once every three weeks.

Question 2

What software is required to operate the printer?

Accepted Answer

Unlike standard office printers, the SC-G6000 Series does not include standard printer drivers and requires a software RIP (Raster Image Processor) to print. For Windows users, "Epson Edge Print PRO" is supplied with the printer to handle print data,. Additionally, "Epson Edge Dashboard" is used to manage media settings (EMX files) and firmware updates

Question 3

How do I fix banding or horizontal stripes in my dtf prints?

Accepted Answer

If you observe horizontal banding or tint unevenness, you should optimize the media settings by performing "Media Feed Adjustment" and "Print Head Alignment",. You can execute these adjustments through the Media Settings > Print Adjustments menu on the control panel, using either "Manual (Standard)" or "Manual (Measurement)" modes to correct the feed amount,.

Question 4

What maintenance is required if I do not use the printer for two weeks?

Accepted Answer

If the printer will not be used for two weeks or longer and will be switched off, you must perform "Pre-Storage Maintenance" to prevent permanent nozzle clogging,. This process requires "Keeping Preparation" via the Maintenance menu and necessitates having five Cleaning Ink Supply Units and a new Waste Ink Bottle ready,.

Question 5

How do I resolve vertical misalignment in the White ink layer?

Accepted Answer

If the White ink layer is misaligned relative to the color image, you can correct the vertical print position using the "Nozzle Shift" feature in the Maintenance menu. If the nozzle check pattern shows vertical misalignment specifically in the White ink lines that standard cleaning does not fix, you may need to clean the nozzle surface physically using the supplied Nozzle Refresh Tool,.

Precision DTF: The Epson G 6070 System

Explore Related Topics